Teledyne 6712SR - Manual (Page 87)

6712SR Refrigerated Sampler
Section 4 Standard Programming
4-33
Table 4-5 Programming Example With 750 Module Installed
1
MODULE INSERTED---
DOWNLOAD DATA NOW
OR LOSE ALL DATA!
DONE
With the sampler off, insert the module in the bay on the controller.
Turn the sampler on by pressing the
On/Off key. Press
↵
. Download stored
data, if you want to keep it. Pressing DONE erases it and advances to the
next screen.
2
6712 SAMPLER
STANDARD PROGRAMMING
For HELP at any
screen press ? key.
This screen will now appear for 8 seconds.
3
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
The option PROGRAM will be blinking. Press
↵
.
4
SITE DESCRIPTION:
“FACTORY051“
CHANGE?
YES NO
The option NO will be blinking. Press
↵
.
For the purposes of this example, it isn’t necessary to change the description.
5
SELECT UNITS FOR
FLOW RATE:
cfs gps gpm Mgd
lps m3s m3h m3d
Select the desired units for the flow rate. For this example, choose cfs.
Press
↵
.
6
SELECT UNITS FOR
FLOW VOLUME:
cf gal Mgal
m3 lit
Select the desired units for the flow volume. For this example, choose Mgal.
Press
↵
.
7
SELECT UNITS FOR
VELOCITY:
fps mps
Select the desired units for the flow velocity. For this example, choose fps.
Press
↵
.
8
PROGRAM MODULE?
YES NO
Select YES to program the module.
9
MODE OF OPERATION:
FLOWMETER
LEVEL AND VELOCITY
The 750 can have two different modes of operation: Flowmeter or Level and
Velocity.
For this example, choose Flowmeter. Press
↵
.
10
FLOW CALCULATION:
AREA * VELOCITY
LEVEL TO FLOW RATE
When you select Flowmeter, you will have two options for performing the
flow conversion: Area * Velocity or Level to Flow Rate.
For this example, choose Area * Velocity. Press
↵
.
11
LEVEL TO AREA:
CHANNEL SHAPE
DATA POINTS
For this example, choose Channel Shape. Press
↵
.
12
ROUND PIPE
U-CHANNEL
RECTANGULAR CHANNEL
TRAPEZOIDAL CHANNEL
For the channel shape, select Round Pipe. Press
↵
.