Teledyne 6712SR - Manual (Page 84)

6712SR Refrigerated Sampler
Section 4 Standard Programming
4-30
CAUTION
Most Teledyne Isco accessories and interfacing equipment are
not certified for us in hazardous locations as defined by the
National Electrical Code. Check applicable guidelines, codes,
and regulations of federal, state, city, and county agencies.
Refer to Appendix C in the back of this manual for more safety
information.
Table 4-4 Programming Example With 730 Module Installed
1
MODULE INSERTED---
DOWNLOAD DATA NOW
OR LOSE ALL DATA!
DONE
With the sampler off, insert the module in the bay on the controller.
Turn the sampler on by pressing the
On/Off key. Press
↵
.
Download stored data, if you want to keep it. Pressing DONE erases it and
advances to the next screen.
2
6712 SAMPLER
STANDARD PROGRAMMING
For HELP at any
screen press ? key.
This screen will now appear for 8 seconds.
3
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
The option PROGRAM will be blinking. Press
↵
.
4
SITE DESCRIPTION:
“FACTORY051“
CHANGE?
YES NO
The option NO will be blinking. Press
↵
.
For the purposes of this example, it isn’t necessary to change the
description.
5
SELECT UNITS FOR
FLOW RATE:
cfs gps gpm Mgd
lps m3s m3h m3d
Select the desired units for the flow rate. For this example, choose cfs.
Press
↵
.
6
SELECT UNITS FOR
FLOW VOLUME:
cf gal Mgal
m3 lit
Select the desired units for the flow volume. For this example, choose Mgal.
Press
↵
.
7
PROGRAM MODULE?
YES NO
Select YES to program the module.