Zebra Technologies ZEBRA RXI4TM - Manual (Page 128)

Routine Maintenance
Cleaning Schedule and Procedures 128
P1009874-002 Xi4™/RXi4™ User Guide 1/7/10
5. Remove the snap plate from the printer.
6. Using the swab from the Preventive Maintenance Kit (part number 47362), clean the back
of the snap plate. In place of the Preventive Maintenance Kit, you may use a clean swab or
soft cloth dipped in a solution of isopropyl alcohol (minimum 90%) and deionized water
(maximum 10%). Allow the solvent to evaporate.
7. To reinstall the snap plate, insert the snap plate into the printer until it hits the stops (
1
) on
the back of the encoder plate.
1