Zebra Technologies ZEBRA RXI4TM - Manual (Page 144)

Troubleshooting
Print Quality Problems 144
P1009874-002 Xi4™/RXi4™ User Guide 1/7/10
The bar code printed
on a label does not
scan. The bar code is not within
specifications because the print
is too light or too dark. Perform the FEED Self Test on page 156 . Adjust
the darkness or print speed settings as necessary.
Not enough blank space around
the bar code. Leave at least 1/8 in. (3.2 mm) between the bar
code and other printed areas on the label and
between the bar code and the edge of the label.
Table 12 • Print Quality Problems (Continued)
Problem Possible Cause Recommended Solution