Control panel – Zebra Technologies ZEBRA RXI4TM User Manual
Page 17
17
Introduction
Control Panel
1/7/10
Xi4™/RXi4™ User Guide
P1009874-002
Control Panel
All controls and indicators for the printer are located on the control panel (
).
• The control panel Liquid Crystal Display (LCD) shows the operating status and printer
parameters.
• The control panel buttons are used to control the printer operations and to set parameters.
• The control panel lights (LEDs) show the printer’s operating status or indicate which
control panel buttons are active.
Figure 3 • Location of Control Panel Buttons and Lights
1
2
3
4
5
7
12
13
14
11
6
8
10
9
1
Power light
On when the printer is on.
2
PAUSE light
On when the printer is paused.
3
Error light
Off
Normal operation—no printer errors.
Blinking
A printer error exists. Check the LCD for more
information.
4
Data light
Off
Normal operation. No data being received or
processed.
On
The printer is processing data or is printing. No data is
being received.
Blinking quickly
The printer is receiving data from or sending status
information to the host computer.