Zebra Technologies ZEBRA RXI4TM - Manual (Page 20)

Printer Setup
Before You Begin 20
P1009874-002 Xi4™/RXi4™ User Guide 1/7/10
Before You Begin
Review this checklist, and resolve any issues before you set up or use your printer.
‰ Unpack and Inspect the Printer Have you unpacked the printer and inspected it for
damage? If you have not, see Unpack and Inspect the Printer on page 21 .
‰ Select a Site Have you selected an appropriate location for the printer? If you have not,
see Select a Site for the Printer on page 22 .
‰ Connect to a Data Source Have you determined how the printer will connect to a
data source (usually a computer)? For more information, see Select a Data
Communication Interface on page 23 .
‰ Attach a Power Cord Do you have the correct power cord for your printer? If you are
unsure, see Power Cord Specifications on page 29 . To attach the power cord and connect
the printer to a power source, see Connect the Printer to a Power Source on page 28 .
‰ Select Media Do you have the correct media for your application? If you are unsure,
see Types of Media on page 31 .
‰ Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if
needed? If you are unsure, see Ribbon Overview on page 33 .