Data cables and wireless cards – Zebra Technologies ZEBRA RXI4TM User Manual
Page 27
27
Printer Setup
Select a Data Communication Interface
1/7/10
Xi4™/RXi4™ User Guide
P1009874-002
Data Cables and Wireless Cards
You must supply all data cables or wireless cards for your application.
Data Cables Ethernet cables do not require shielding, but all other data cables must be fully
shielded and fitted with metal or metallized connector shells. Unshielded data cables may
increase radiated emissions above the regulated limits.
To minimize electrical noise pickup in the cable:
• Keep data cables as short as possible.
• Do not bundle the data cables tightly with the power cords.
• Do not tie the data cables to power wire conduits.
Wireless Cards For supported wireless cards, refer to the ZebraNet Wireless User Guide. A
copy of the manual is available at
or on the user CD that came
with your printer.