Zebra Technologies ZEBRA RXI4TM User Manual
Page 140
Troubleshooting
LCD Error Messages
140
P1009874-002
Xi4™/RXi4™ User Guide
1/7/10
There is not enough memory to
perform the function specified on
the second line of the error
message.
Free up some of the printer’s memory
by adjusting the label format or printer
parameters. One way to free up
memory is to adjust the print width to
the actual width of the label instead of
leaving the print width set to the
default. See
.
Ensure that the device, such as FLASH
memory or PCMCIA card, is installed
and not write protected or full.
Ensure that the data is not directed to a
device that is not installed or is
unavailable.
Refer to the Maintenance Manual for
more information about the specified
function.
Table 11 • LCD Error Messages (Continued)
LCD Display/
Printer Condition
Possible Cause
Recommended Solution