Media specifications, 110xi4 and r110xi4 – Zebra Technologies ZEBRA RXI4TM User Manual
Page 170
Specifications
Media Specifications
170
P1009874-002
Xi4™/RXi4™ User Guide
1/7/10
Media Specifications
Use the correct size and type of labels for best performance. Refer to the tables that follow for
specifications.
110Xi4 and R110Xi4
110
Important •
Media registration and minimum label length are affected by label type and
width, ribbon type, print speed, and printer mode of operation. Performance improves as
these factors are optimized. Zebra recommends qualifying any application with thorough
testing.
Media Specifications
200 dpi
300 dpi
600 dpi
Minimum label length
Tear-Off
0.7 in.
*
(18 mm
*
)
0.7 in.
*
(18 mm
*
)
0.7 in. (18 mm)
Peel-Off
0.5 in.
*
(13 mm
*
)
0.5 in.
*
(13 mm
*
)
0.5 in. (13 mm)
Cutter
1.5 in.
*
(38 mm
*
)
1.5 in.
*
(38 mm
*
)
1.5 in. (38 mm)
Rewind
0.25 in.
*
(6 mm
*
)
0.25 in.
*
(6 mm
*
)
0.25 in. (6 mm)
RFID labels
**
**
**
Total media width
(label + backing, if any)
Minimum
0.79 in.* (20 mm*)
0.79 in.* (20 mm*)
0.79 in. (20 mm)
Maximum
4.5 in.* (114 mm*)
4.5 in.* (114 mm*)
4.5 in. (114 mm)
RFID labels
**
**
**
Total thickness
(includes backing, if any)
0.003 in. (0.076 mm)
0.003 in. (0.076 mm)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)
0.012 in. (0.305 mm)
0.012 in. (0.305 mm)
Cutter maximum full-width media thickness
0.009 in. (0.23 mm)
0.009 in. (0.23 mm)
0.009 in. (0.23 mm)
Roll media core inside diameter
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
Maximum roll diameter on 3 in. (76 mm) core
8.0 in. (203 mm)
8.0 in. (203 mm)
8.0 in. (203 mm)
Interlabel gap
Minimum
0.079 in.* (2 mm*)
0.079 in.* (2 mm*)
0.079 in. (2 mm)
Preferred
0.118 in.* (3 mm*)
0.118 in.* (3 mm*)
0.118 in. (3 mm)
Maximum
No more than the calibrated
length of the label.
No more than the calibrated
length of the label.
No more than the calibrated
length of the label.
RFID labels
**
**
**
Maximum internal fanfold media pack size
(label + backing): L × WЧH
8.0Ч4.5Ч4.5 in.
(203Ч114Ч114 mm)
8.0Ч4.5Ч4.5 in.
(203Ч114Ч114 mm)
8.0Ч4.5Ч4.5 in.
(203Ч114Ч114 mm)
Ticket/tag sensing notch: L × W
0.12×0.25 in. (3×6 mm)
0.12×0.25 in. (3×6 mm)
0.12×0.25 in. (3×6 mm)
Ticket/tag sensing hole diameter
0.125 in. (3 mm)
0.125 in. (3 mm)
0.125 in. (3 mm)
Label registration tolerance (vertical)
± 0.06 in. (± 1.5 mm)
± 0.06 in. (± 1.5 mm)
± 0.06 in. (± 1.5 mm)
Label registration tolerance (horizontal)
± 0.06 in. (± 1.5 mm)
± 0.06 in. (± 1.5 mm)
± 0.06 in. (± 1.5 mm)
* Does not apply to RFID labels.
** This parameter varies for each transponder type.