Zebra Technologies ZEBRA RXI4TM - Manual (Page 169)

169 Specifications
Ribbon Specifications
1/7/10 Xi4™/RXi4™ User Guide P1009874-002
Ribbon Specifications
Refer to the following tables for ribbon specifications.
110Xi4 and R110Xi4
140Xi4, 170Xi4, and 220Xi4
Note • Consider the following when using ribbon:
• Match the ribbon to the label width and printhead width that you are using. The ribbon
should be at least as wide as the labels to protect the printhead from excessive wear.
• Ribbon must be wound with the coated side out.
Ribbon Specifications 200 dpi 300 dpi 600 dpi
Printhead resolution 203 dots/inch
(8 dots/mm) 300 dots/inch
(12 dots/mm) 600 dots/inch
(24 dots/mm)
Ribbon width Minimum 0.79 in. (20 mm) * 0.79 in. (20 mm)* 0.79 in. (20 mm)*
Ribbon width Maximum 4.33 in. (110 mm) 4.33 in. (110 mm) 4.33 in. (110 mm)
Standard length with 2:1 label to
ribbon ratio 984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1 label to
ribbon ratio 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll outside
diameter 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)
* For RFID labels, the minimum ribbon width is determined by the minimum label width for the transponder being used.
Ribbon
Specifications
140Xi4 170Xi4 200 dpi 170Xi4 300 dpi 220Xi4 200 dpi 220Xi4 300 dpi
Printhead resolution 203 dots/inch
(8 dots/mm) 203 dots/inch
(8 dots/mm) 300 dots/inch
(12 dots/mm) 203 dots/inch
(8 dots/mm) 300 dots/inch
(12 dots/mm)
Ribbon width Minimum 1.57 in. (40 mm) 2.0 in. (51 mm) 2.0 in. (51 mm) 4.25 in. (108 mm) 4.25 in. (108 mm)
Ribbon width Maximum 5.10 in. (130 mm) 6.7 in. (170 mm) 6.7 in. (170 mm) 8.60 in. (220 mm) 8.60 in. (220 mm)
Standard length with 2:1
label to ribbon ratio 984 ft (300 m) 984 ft (300 m) 984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1
label to ribbon ratio 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside
diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll
outside diameter 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)