Zebra Technologies ZEBRA RXI4TM - Manual (Page 83)

83 Operations
Adjust Printhead Pressure and Toggle Position
1/7/10 Xi4™/RXi4™ User Guide P1009874-002
Printhead Pressure Adjustment
If positioning the toggles properly does not solve a print quality problem, try adjusting the
printhead pressure. Maximize printhead life by using the lowest pressure that produces the
desired print quality.
To adjust printhead pressure, complete these steps:
1. Print some labels at 2.4 in. (61 mm) per second by running the PAUSE Self Test
on page 155 .
2. While printing labels, use the control panel controls to lower the darkness setting until the
labels are printing gray instead of black.
3. Loosen the upper knurled nuts on the toggle assemblies (
1
).
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
1