Zebra Technologies ZEBRA RXI4TM - Manual (Page 63)

63 Operations
Load Media in Rewind Mode
1/7/10 Xi4™/RXi4™ User Guide P1009874-002
11. If your printer includes a media dancer assembly (
1
), thread the media under the media
dancer assembly roller. For all printers, thread the media under the media guide roller (
2
)
and then the upper media sensor (
3
).
12. Push the media forward until it passes under the printhead assembly (
1
), under the
snap plate (
2
), and then over the platen roller (
3
).
Important • Make sure that you thread the media under these components. If you thread
the media over them, the media obstructs the ribbon sensor and causes a false
RIBBON OUT error.
2
3
1
1
3
2