Zebra Technologies ZEBRA RXI4TM User Manual
Page 99
99
Configuration
Standard Control Panel Parameters
1/7/10
Xi4™/RXi4™ User Guide
P1009874-002
List Network Settings
This option prints a network configuration label (see
), which lists the settings for any print server that is installed.
To print a network configuration label:
1.
Press
PLUS (+)
to select
.
List All
This option prints labels that list the available fonts, bar codes, images,
formats, and the current printer and network configurations.
To print labels for all settings:
1.
Press
PLUS (+)
to select
.
Initialize Flash Memory
This option erases all previously stored information from Flash memory.
Caution • This option completely erases the Flash memory.
To initialize Flash memory:
1.
If prompted for a password, enter the printer password. For
instructions, see
Change Password-Protected Parameters on page 88
.
The display shows
INITIALIZE FLASH?
2.
Press
PLUS (+)
to select
YES
.
The display shows
ARE YOU SURE?
.
3.
Do you want to continue?
• Press
MINUS (-)
to select
NO
to cancel the request and return to the
INITIALIZE FLASH
prompt.
• Press
PLUS (+)
to select
YES
and begin initialization.
When initialization is complete, the control panel displays
INITIALIZING COMPLETED
.
Note •
Depending on the amount of free FLASH memory,
initialization may take up to 1 minute to complete.
Table 8 • Printer Parameters (Sheet 9 of 22)
Language/Parameter
Action/Explanation