VEGA VEGAPULS 45 VBUS - Manual (Page 42)

42 VEGAPULS 42, 44 and 45 – VBUS
Setup
5 Setup
5.1 Adjustment structure
The radar sensors can be operated
- with the PC (adjustment program VVO,
version
≥
2.70)
- with the adjustment module MINICOM
- with the VEGAMET signal conditioning
instrument.
The adjustment is always possible with one
adjustment instrument at once.
Adjustment with the PC
The PC with the adjustment program VVO
(VEGA Visual Operating) in version
≥
2.70
can be connected to:
- the sensor
- the signal cable
- the VEGAMET 514V, 515V signal condition-
ing instrument
- the VEGALOG 571 processing system.
With the adjustment program VVO
on the PC,
you can adjust the radar sensors very easily.
A digital adjustment signal is herewith
superimposed to the signal and supply
cable. By this means, the adjustment can be
made directly on the sensor, on any position
of the signal cable or on the VEGAMET or
VEGALOG processing system.
Note:
Make sure that for adjustment of VEGAPULS
42, 44 and 45 sensors, the adjustment pro-
gram VVO in version 2.70 or higher is
installed.
PC directly on the sensor
Insert VEGACONNECT into the communica-
tion sockets of an individual sensor. Only
sensor-relevant adjustment options such as
e.g., sensor optimisation on the affected
sensor, are adjustable. Other sensors and
VEGAMET are then not adjustable. This is
due to an adjustment hierarchy beginning
with VEGAMET or VEGALOG and ending
with the sensor.
PC on the signal cable
Only the sensor-relevant adjustment options
of sensors connected to the signal cable are
adjustable on the signal cable. However, not
available are the configuration and measured
data processing functions of VEGAMET or
VEGALOG.
Note:
The adjustment with the "PC on the signal
cable" and with the "PC directly on the sen-
sor" is described in chapter "5.2 Adjustment
with the PC on the signal conditioning instru-
ment". For this reason, adjustment with the
PC when connected directly to the sensor or
the signal cable is not shown separately.
Adjustment with the PC on the VEGAMET
signal conditioning instrument or on the
VEGALOG processing system
The PC communicates via the interface con-
verter VEGACONNECT 2 with the signal
conditioning instrument or via the standard
RS 232 interface cable with the VEGALOG
processing system and all sensors con-
nected to VEGAMET or VEGALOG. If you
connect the PC to the processing system or
the signal conditioning instrument, besides
the connected sensors, also the processing
system or the signal conditioning instrument
is adjustable.
Adjustment with the VEGAMET signal
conditioning instrument
Sensor and VEGAMET signal conditioning
instrument can be operated with the 6 key
adjustment field of the signal conditioning
instrument just like with the adjustment pro-
gram VVO. The scope of the adjustment
functions is the same as with VVO on the PC.