VEGA VEGAPULS 45 VBUS - Manual (Page 81)

VEGAPULS 42, 44 and 45 – VBUS 81
Adjustment with the PC on VEGALOG
Now you have to carry out the parameter
adjustment for the sensor. The parameter
adjustment is nearly identical to the param-
eter adjustment in chapter "5.2 Adjustment
with the PC on VEGAMET".
Parameter adjustment 1
In the menu " Instrument data/Parameter ad-
justment" you carry out all important sensor
settings. The settings correspond to those
under parameter adjustment 1 in chapter "5.2
Adjustment with the PC on the signal condi-
tioning instrument".
The same is valid for the following menu items
corresponding to the adjustment steps in
chapter "5.2 Adjustment with the PC on the
signal conditioning instrument". For this rea-
son, they are not described again in this
paragraph.
•
Sensor optimisation
- Meas. environment/Operating range
- Meas. environment/Meas. conditions
- Meas. environment/Pulse velocity
- Echo curve
- False echo storage
•
Parameter adjustment 2
- Linearisation
- User-programmable linearisation curves
- Defining the linearisation curve by incre-
mental filling
- Calculating the linearisation curve
- Calculate cylindrical tank
•
Outputs
- Configuration outputs
- Parameter adjustment outputs
•
Display of measured value
•
Simulation
•
Backup