VEGA VEGAPULS 45 VBUS - Manual (Page 68)

68 VEGAPULS 42, 44 and 45 – VBUS
Adjustment with the PC on the signal conditioning instrument
Backup
• Click to "
Services/Backup/Sensors".
In the menu field " Backup" the sensor with its
serial number is displayed. You can save the
sensor individually or in groups with all rel-
evant settings in any directory on your PC. It
is also possible to add small notes to each
backup.
Furthermore you can save the settings of the
VEGAMET signal conditioning instrument or
of VEGALOG.
Restore data
Saved sensor data can be transferred to
other sensors at a later time. If e.g. you have
a system with several of the same storage
vessels and identical sensors, it is sufficient
to configure one sensor, save the settings
and then transfer them to the other sensors.
• Choose the menu "
Services/Restore con-
figuration/Sensors".
In the yellow window cutout, you choose a
sensor (or a signal conditioning instrument)
which should be overwritten with the settings
of another sensor.
Choose in the field " Selection of backup" the
serial number of the sensor from which you
want to transfer the settings. With "
Restore
after" you transfer these sensor settings to
the sensor you have chosen in the yellow
window cutout.
Besides the data of the sensors, also the
data of a VEGAMET or VEGALOG can be
restored.