VEGA VEGAPULS 45 VBUS - Manual (Page 48)

48 VEGAPULS 42, 44 and 45 – VBUS
Adjustment with the PC on the signal conditioning instrument
• Confirm with "
OK".
• Click in the menu window " Sensor coordi-
nation" again to "
OK".
You are again in the menu window " Create
new measurement loop - Sensor configura-
tion".
• Click to "
Continue"…
• Click in the menu window " Create new
measurement loop - Measurement loop
description" to "
Level".
• Enter in the menu window " Create new
measurement loop - Measurement loop
description" a measurement loop number
and a measurement loop description.
In this menu window you can select how your
level signal will be outputted, e.g. as current,
voltage, relay signal, etc. This "Configuration"
of outputs is described in detail in chapter
"Parameter adjustment 2" under "Outputs".
• Confirm with "
OK" and the previous menu
window appears again. Click again to "
OK"
and wait a moment until the settings are
transferred.
Configuration information
In the menu " Configuration/Measuring sys-
tem" - "Sensor survey" you can check the
configuration.