3 adjustment with vegamet or minicom, Indicating and adjustment panels – VEGA VEGAPULS 45 VBUS User Manual

Page 69

Advertising
background image

VEGAPULS 42, 44 and 45 – VBUS

69

Adjustment with MINICOM or VEGAMET

The adjustment of VEGAMET and the
adjustment of MINICOM are identical.
Adjustment is made with six keys. A small
display shows you, apart from the measured
value, a short message on the menu item or
on the value of a menu adjustment.

The volume of information of the small display,
however, cannot be compared with that of the
adjustment program VVO, but in conjunction
with the following menu schematic of
MINICOM, the adjustment will not be a prob-
lem. You might even be able to carry out
adjustments more quickly and directly with
the small adjustment field than with the PC.

Note:

You will find the menu schematic for
VEGAMET in the operating instructions of the
signal conditioning instruments.

5.3 Adjustment with VEGAMET or

MINICOM

Beside the PC, the VEGAPULS series 40
radar sensors with VBUS output signal can
also be adjusted with
- the signal conditioning instrument
- or the detachable adjustment module

MINICOM.

The adjustment with VEGAMET signal condi-
tioning instrument provides all the adjustment
options available on the PC. Adjustment
takes on a different appearance, but the
scope of the adjustment functions is the
same.

With the adjustment module MINICOM, only
the sensor-relevant adjustments are possi-
ble, such as e.g. operating range, measuring
conditions, sensor scaling or false echo
memory. However, all adjustment steps relat-
ing to the configuration of the VEGAMET
signal conditioning instrument and its signal
processing (adjustment, configuration of the
inputs and outputs, linearisation curves,
simulation …) are not possible.

Indicating and adjustment panels

515V

CONNECT

on

!

100

%

ESC

-

OK

+

1

2

Depending on the menu item,
change values or choose out of list

Choose menu window or shift
flashing cursor

Save the adjusted value or move
to the menu below

Branching, i.e. jump
to the lower menu
with [OK]

Interrupt adjustment
or jump to the next
higher menu

Display,
indication of
- measured
value
- menu item
- parameter
- value

Analogue
LED display
(0 … 100 %)

VEGAMET signal condi-
tioning instrument

Adjustment module
MINICOM

-

+

ESC

OK

Tank 1

m (d)
12.345

Advertising