VEGA VEGAMET 514… D - Manual (Page 16)

16 VEGAMET 514… D
Set-up
4.2 Adjustment system
Indicating and adjustment module
ESC OK
- +
100
%
Acc. to the parameter, change value or
select from list
Select menu point
Acc. to the menu point store the
adjusted value or change to the lower
menu
ESC
OK Sub
menu
Indication of
measured values
Menu tree
Main
menu
Parameters are indicated by the missing symbol .
The value of the parameters can be modified or
selected out of a list by [+] or [–]. The modified value
can be stored with [OK]. Push [ESC] to interrupt an
adjustment (without storing the modfication).
Certain parameters can be only indicated, however
their value cannot be modified.
Reset to the upper menu is made with [ESC].
60 minutes after a key is pushed for the last time, an
automatic reset to the indication of measured values.
The adjustment is menu oriented and is made via six
keys in conjunction with clear text indication. The
jump from indication of measured values to the main
menu is made with [OK]. Use [→ ] or [←] to change
within the main menu from one menu point to the
other.
A branch is indicated by the symbol and ensures
with [OK] a jump to the lower menu. In each menu
are thematically combined parameters (possibly in
further sub menus).
MST1
%
36.9
MST2
%
Menu point
Parameter
value
Branch, i.e. jump to the lower menu
[OK]
Acc. to the menu point delete the
adjustment or change to the
upper menu
Indication of
- measured value
- menu points
- parameters
- values
add.
functions Confi-
gura-
tion Param.
MST2 Param.
MST1
Pass-
word
off Out-
puts Meas.
point Inputs Simu-
lation Output Pro-
cess-
ing Ad-
just-
ment
Sca-
ling Lin.
curve
Integra-
tion
time
10
Analog indication