VEGA VEGAMET 514… D - Manual (Page 18)

18 VEGAMET 514… D
Ser.No.12345678
ESC OK
- +
1 2
on
100
%
CONNECT
515
!
Set-up
4.4 Adjustment via PC
Signal conditioning instrument with operating module
VEGACONNECT
connection cable
4.5 Set-up sequence
Configuration
- adjust instrument address
- configure inputs
- prepare meas. points
- coordinate outputs
Parameter adjustment
If you want to detect the level and the flow as
parameter, it is recommended, to carry out the
adjustment for MST1 and MST2 at the same time i.e.
immediately one after the other.
- Parameter adjustment MST1
- carry out adjustment
- determine the processing
- define outputs
- Parameter adjustment MST2
as described above
Additional functions
- edit linearization curves
- change language (if necessary)
- activate password (if necessary)
PC with VVO-Software
Set-up
- directly via the keys of the adjustment module
(see following descriptions)
- or with a PC, provided with VVO-Software (VEGA
Visual Operating), and a VEGACONNECT
connection cable