VEGA VEGAMET 514… D - Manual (Page 17)

VEGAMET 514… D 17
Set-up
Adjustments and coordinations must be provided to
determine the instrument functions. This
determination is made by the following
configurations.
Configuration
–– Configuration
Inputs, Sensor connections, mark
–– Input 1
–– Input 4
–– Configuration meas. points
–– Application
–– Sensor
–– Kind
–– Options
–– Sensor coordination
–– Instrument address
–– Configuration outputs
–– Current outputs
–– Volt outputs
–– Relay outputs
–– PC- / PLC-output
–– VEGADIS-output
Under the section "Additional functions" all superset
instrument functions, i.e. their adjustment and
coordination possibilities are composed.
Additional functions
–– Password
–– Edit lin. curves
–– Info
–– Input info
–– VEGAMET-Info
–– Program info
–– Meas. point info
–– Language
–– Reset VEGAMET
–– Reset configuration
–– Reset sensor characteristic values
–– Reset lin. curves
–– Service
4.3 Menu list
Values must be adjusted or modified to determine
the meas. points. This determination is made
separately for each meas. point by the following
parameter adjustments.
Parameter adjustment MST1
–– Adjustment
–– with level
–– without level
–– Processing
–– Scaling (level)
–– Lin. curves
–– Integration time
–– Outputs
–– Current outputs
–– Volt outputs
–– Relay outputs
–– MET-indication
–– PC- / PLC-outputs
–– DIS-outputs
–– Simulation
–– Special functions
Parameter adjustment MST2
–– Adjustment
–– with flow
–– without flow
–– Processing
–– Scaling (flow)
–– Lin. curves
–– Integration time
–– Outputs
–– Current outputs
–– Volt outputs
–– Relay outputs
–– Display
–– PC / PLC
–– DISBUS-output
–– Simulation
–– Special functions