5 vegamet reset, 6 service – VEGA VEGAMET 514… D User Manual
Page 45
VEGAMET 514… D
45
Set-up, additional functions
4.8.5
VEGAMET Reset
Additional functions
–– VEGAMET Reset
–– Reset configuration
–– to default
With reset to default the whole configuration
–– Reset OK?
and the whole parameter adjustment
–– Reset now! OK?
(if necessary all MST) are reset to factory setting
The basic configuration however remains,
e.g. pressurized level measurement.
–– to combi application
The combi application available at the moment
–– delete all MST?
is deleted and in their position a preconfiguration
–– etc.
to the new combi application to be adjusted is
generated, see page 6.
–– Reset sensor values
–– Reset Input 1
The sensor data of the sensor connected to input 1
–– Reset OK?
are deleted
–– Reset now! OK?
–– Reset linearization curves
–– Reset lin. curve 1
With this reset you delete the index markers
–– Reset OK?
of linearization curve 1
–– Reset now! OK?
–– Reset lin. curve 2
as above, however linearization curve 2
–– Reset lin. curve 3
as above, however linearization curve 3
–– Reset all curves
as above, however all linearization curves
4.8.6
Service
Additional functions
–– Service
–– Current output
1...3
the actual currents and voltages are
–– Volt output
1...3
indicated