2 configuration meas. point – VEGA VEGAMET 514… D User Manual
Page 21
VEGAMET 514… D
21
Set-up, configuration
4.6.2
Configuration meas. point
VEGAMET 514 D and 514 VD signal conditioning instruments in their basic configuration are designed for
combi application, i.e.
- MST1, level
- MST2, flow measurement
Supplementary the following modifications of the configuration can be carried out.
Configuration meas. point
–– Combi application
If a general modification of the basic configuration
–– Application
flow
should be necessary, a "Reset to combi application"
–– Sensor
Hydrostatic
should be carried out, see respective menu point on
–– Kind
Standard
page 44. A new basic configuration can be then
programmed acc. to the product description 1.3
(see page 6).
–– Options
no
offset corr.
(for MST1 and MST2)
–– Sensor coordination
–– Position A
Input 1
–– Position D
Input 4
–– MST1 level
–– MST name
MST
Providing of a special
MST
name
MST name e.g.
name
level
MST1
–– Fault signal
on
on means that a failure of MST1 is transmitted
off
to the failure processing off means no
transmission
–– Tare
see page 21
–– Monitoring
see page 21
–– MST2 flow
–– MST name
MST
Providing of a special
MST
name
MST name, e.g.
name
flow
MST2
–– Fault signal
as above, however MST2
–– Monitoring
see page 21
A
Input 4
Channel no.
K1
Input 1
Channel no.
S1