5 parameter adjustment mst1 and mst2, simulation – VEGA VEGAMET 514… D User Manual
Page 42
42
VEGAMET 514… D
Set-up, parameter adjustment
Parameter adjustment MST1 and MST2, outputs
–– MET-indication
–– relating to
Percent
scaled
etc. choice acc. to MST-enquiry
–– Unit
%
scaled
etc. choice adapted to above determination
–– PC/PLC-outputs
–– PC/PLC output 1
–– relating to
Percent
scaled
etc. choice acc. to MST-enquiry
–– Unit
%
scaled
etc. choice adapted to above determination
–– PC/PLC output 2 … 7
as described above
–– DIS-outputs
–– DIS-output 1
–– relating to
Percent
scaled
etc. choice acc. to MST-enquiry
–– Unit
%
scaled
etc. choice adapted to above determination
–– DIS-output 2 … 7
as described above
4.7.5
Parameter adjustment MST1 and MST2, simulation
Note
The whole indication flashes with activated simulation. The measured data delivered from the sensors are not
transmitted for processing, therefore this menu point should be quit as soon as possible. Reset to the
indication of measured values automatically after 60 minutes.
Parameter adjustment MST1, simulation
–– Simulation now! OK?
–– Simulation
with [+] or [–]