VEGA VEGAMET 391 4 … 20 mA_HART - Manual (Page 11)

11
4 Mounting
VEGAMET 391 • 4 … 20 mA/HART
36032-EN-130701
3
2
1
Fig. 2: Front panel mounting
1 Front panel, front plate or switching cabinet door
2 Clamping elements
3 Slotted screw
→
Fasten the instrument by means of four screws (max. ø 4 mm) on
the inner side of the housing or the mounting plate according to
the following illustration.
73 mm
(2.87")
86,5 mm (3.41"
)
1
2
Fig. 3: Screw mounting
1 Fixing screw
2 Rear of the housing or mounting plate
1. Fasten the mounting plate to the instrument with the four attached
hexagon screws.
2. Screw the carrier rail adapter to the mounting plate by using the
four attached Phillips head screws.
Screw mounting
Carrier rail mounting