GE Industrial Solutions 6KCV301DGF - Manual (Page 12)

—————— Digital General Function Card —————— 12
GEI-100430
1.2.4 JUMPERS
The following table shows the 6KCV301DGF jumpers:
Name Default Function
S7 OFF Reserved (NMI)
S17 OFF Reserved (hardware reset)
S23 ON
S24 ON
S27 A Reserved
S28 OFF Reserved
d0040ge
ON only on the RS-485 line end device (for terminal
resistor)
The only jumpers that it is possible to move are the RS-485 serial link jumpers. For
more information see section 1.2.2.
Figure 1.2.4.1: 6KCV301DGF Jumper Locations