GE Industrial Solutions 6KCV301DGF - Manual (Page 42)

—————— Digital General Function Card —————— 42
GEI-100430
749 ivar 49
0
_______
k003
If you want know some of the parameter attributes press enter(ENT).
749 ivar 49
par 0
k004
By pressing UP and DOWN you can display some attributes of the parameter.
Available attributes are:
par
min
max
att
proc
def
type
ipa
k005
Refer to the DBASE description for the meaning of these attributes.
Two of these fields are also writable. These fields are:
par
ipa
k006
If you change the par attribute you change the value of the parameter.
If you change the ipa attribute you can move directly to a new parameter, without the
use of UP and DOWN (this can be faster).
To enter a new value, you must select the desired attribute, then press enter(ENT). If
the attribute is writable the rightmost digit starts blinking. You can:
1) change the value of the blinking digit by pressing plus(+) and minus(-) keys. The
available characters you can enter are:
IF THE VALUE YOU WANT TO
ENTER IS IN DECIMAL NOTATION
IF THE VALUE YOU WANT TO
ENTER IS IN HEXADECIMAL
NOTATION
‘0’ to ‘9’ ‘0’ to ‘9’
e ‘A’ to ‘F’
.
-
space
d0290g
As you can see, if the number is in decimal notation you can enter even the exponential
notation.