GE Industrial Solutions 6KCV301DGF - Manual (Page 13)

13 —————— Digital General Function Card ——————
6KCV301DGF
1.2.5 CAN CONNECTOR
The DNet (CAN) interface provides signal isolation and uses a 4- wire cable : two for
signals and two for external power supply. The 6KCV301DGF connectors have the
following meanings:
Pin Signal Description
1 V- Negative external power supply
2 CAN- Negative CAN signal
3 SHIELD Cable shield
4 CAN+ Positive CAN signal
5 V+ Positive external power supply
6
7
d0050g
GND Ground: connect to ground
Note that the line terminator resistor is external to the card according to DeviceNet
specification.