2 dgf serial line – GE Industrial Solutions 6KCV301DGF User Manual
Page 46
—————— Digital General Function Card ——————
46
GEI-100430
If you want to abort the input press CANC until an error message appears on the
display. If the password is entered correctly the following information will be displayed:
special funct.
password
k017
If the password is not entered correctly the following information will blink:
ERROR: 9
k021
If this message appears, press any key to continue.
To return to the main menu of the DGF press cancel (CANC) until you find:
opt: DGFC
archives
k012
If the password is entered correctly, you will be able now to go in the “view parameter”
menu and change all the following attributes:
attribute
changeable without
password
changeable with
password
par
YES
YES
min
NO
YES
max
NO
YES
att
NO
NO
proc
NO
YES
def
NO
NO
type
NO
NO
ipa
YES
YES
d0310g
ERROR MANAGEMENT:
When you are using the keypad to enter a value, you can introduce one or more errors.
In this case the following information will blink:
ERROR: 9
k021
If this message appears, look at the error table for specific information.
To recover from this error press any key and retry the input.