GE Industrial Solutions 6KCV301DGF - Manual (Page 16)

—————— Digital General Function Card —————— 16
GEI-100430
2.1.2 DGF application
Application code can be obtained these ways:
1 Graphical development tool Win+Drive and design the specific application.
2 Graphical development tool Win+Drive and a factory predeveloped application.
The standard application can be modified with Win+Drive according to the specific
needs.
3 Use a factory developed and tested application and load it on the DGF unmodified.
In this case the Win+Drive can be used.
4 Demo version
386
Firmware
387
DRIVE PC
CAN
Controller
DPRAM
I/O
OPTIONAL
CARD
DBASE
EEPROM STORE AREA DBASE AREA
DBASE
COPROCESSOR
SLINK3
ARCHIVE
Figure 2.1.1.1: Logical structure
NUCLEUS & FIRMWARE The firmware core of the DGF consists of the operati-
ve system multi-task real time MARTE. The core regulates the
times and the task priorities forming the firmware.