GE Industrial Solutions 6KCV301DGF - Manual (Page 41)

41 —————— Digital General Function Card ——————
6KCV301DGF
MENU
VIEW PARAMETER
VIEW DATA BASE
STATUS DGFC
RESET ALARM
IDLE TO READY
READY TO RUN
STATUS TO IDLE
ARCHIVES
CHECK ALL DB
SAVE ALL DB
LOAD ALL DB
INIT ALL DB
CHECK PARAMETERS
SAVE PARAMETERS
LOAD PARAMETERS
DEFAULT PARAMETERS
CHECK BRICKS
SAVE BRICKS
LOAD BRICKS
INIT BRICKS
SPECIAL FUNCTIONS
PASSWORD
OPT2
d0028
MENU VIEW PARAMETER:
In this submenu all parameters of the card are displayed. If the parameters can be
changed and the status logic permits it, they can be written.
To access this menu (from OPTION/OPTION2/MENU) move among menus by pressing
UP and DOWN until you find:
opt: DGFC
view parameters
k001
then press enter(ENT).
You are now in the view parameters DGF menu.
Once enter is pressed the following information will be displayed:
1DgfcBrk386
1.000 ver
k002
The first line shows a number (this is the IPA of parameter) and a string (this is the
DESCRIPTOR).
The second line shows the actual value of the parameter and the measure unit, if any. If
the parameter type is defined as hexadecimal, the parameter is displayed in hexadecimal
notation. You can move from a parameter to another by pressing UP and DOWN .
For example, by pressing DOWN , a new parameter will be displayed: