Burkert Type 1067 - Manual (Page 77)

POSITIONER 1067
E-25-
4 OPERATION
To remove additional functions which have brought into the main menu, again select the ADDFUNCT
function and then press the MANUAL/AUTOMATIC key in the additional menu. If only one additional
function marked with a star (
* ) is now selected and confirmed by pressing the MANUAL/AUTOMATIC
key, it will then be removed from the main menu, and desactivated..
Fig. 26 shows the complete configuration menu with all the basic and additional functions. Continued
selection in the vertical direction is achieved by pressing the appropriate arrow keys. Press the MANU-
AL/AUTOMATIC key to move in the horizontal direction.
Setting numerical values in the appropriate menu items is achieved by pressing the „Arrow up“ key
once or several times (increment numerical value) or the „Arrow down“ (decrement numerical value). In
the case of 4-digit numbers, only the flashing position can be set using the „Arrow keys“. Pressing the
MANUAL/AUTOMATIC key changes to the next position.
4.5.2 Confi guration menu
The configuration menu can be activated from the process control level by pressing the MANUAL/
AUTOMATIC key during 5 seconds. It consists of a main menu and additional menu. The main menu
contains mainly the basic functions which are to be specified on the initial setting up (cf § 4.3). The
additional menu covers all the additional functions which can be selected. It can be reached via the
ADDFUNCT item in the main menu. The equipment functions and parameters can only be specified
within the main menu. If necessary, however, the main menu can be extended by additional functions
from the additional menu, and these can in turn also be specified.
The principle of taking menu items from the additional menu into the main menu is described by figure
25. First select the ADDFUNCT item in the main menu and then press the MANUAL/ AUTOMATIC key
to enter the additional menu. When in the additional menu the „Arrow up“ or „Arrow down“ keys can
be pressed to set the required additional function. If this additional function is confirmed by pressing
the MANUAL/ AUTOMATIC key, it is then automatically marked with a star (*). All the functions marked
in this way are brought into the main menu after the ENDFUNCT is confirmed. The additional functions
can now be parametered in the main menu expanded in this way, and automatically activated.
Fig. 28 Principle of integration of additional function in the main menu
Selection of item
ADDFUNCT
Additional menu
Expanded
main menu
Return to expanded
main menu
Confirmation of selected
additional functions for
importation in main menu
Main menu
Confirmation of
selected item