Luminex 200 User Manual with IS 2.3 Software - Manual (Page 14)

Luminex 200 System User Manual
x
MAP Technology
1 - 4 PN 89-00002-00-144 Rev. B
Access doors must be closed while operating the Luminex 200
analyzer; the operator must be present during operation.
Biological
Heat
Blue Indicator Light
The blue light above the Luminex 200 analyzer sample arm indicates
the on/off status of the Luminex 200 analyzer, and is harmless. The
blue light-emitting diode (LED) does not emit light in the UV
spectrum.
Warning: Human and animal samples may contain biohazardous
infectious agents.
Where exposure (including aerosol) to potentially biohazardous
material exists, follow appropriate biosafety procedures and use
personal protective equipment, such as gloves, gowns, laboratory
coats, face shields, or mask and eye protection, and ventilation
devices.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazardous waste material.
Warning: The heater plate of the Luminex XYP instrument may
be hot and could cause personal injury if touched. Do not touch
the heater plate.