Luminex 200 User Manual with IS 2.3 Software - Manual (Page 24)

Luminex 200 System User Manual
x
MAP Technology
2 - 8 PN 89-00002-00-144 Rev. B
1
Figure 2-1 Back of the Luminex 200 Analyzer and Luminex XYP
Instrument
Fluidics
Luminex XYP
Instrument Sample
Probe
A stainless steel sample probe acquires the sample.
Cheminert ® Fitting This fitting attaches the sample probe to the sample tubing.
Disconnect this fitting when you remove the sample probe. See
Figure 2-2.
5 7
4
3
2
1
6
1. Air intake filter access door 5. Communication Ports (DB9)
2. Power Switch 6. XYP Communication Port (DB9)
3. Power Input Module 7. Analyzer ventilation filter
(on bottom of analyzer)
4. XYP Ventilation Filter
Warning: During operation, this system contains exposed moving
parts that can result in a puncture hazard. Risk of personal injury
is present. Keep hands and fingers away from the sample probe.
The shield should be in place.