Multichannel Systems Roboocyte2 Manual - Manual (Page 100)

Roboocyte2 Manual
96
Data Display
Whenever you select one or more recordings - up to all recordings in the plate - in the "Data List",
the recorded data traces will be displayed in the “Data Display”. Please see the screenshot above.
For example, when you select a single continuous recording (Recording 30), one current trace will
be displayed.
Solution Exchange Tags in the Recording Display
The small red numbered tags in the upper part of the data window reflect the time at which
valves were opened. In the example shown above, valve 4 was opened (and valve 1 closed) at
t = 5 s and valve 1 was opened (and valve 4 was closed) at t = 20 s. Please note that these tags
appear only when a single recording is selected.
Baseline Subtraction, Drift Correction, Leak Subtraction
The left side of the data window offers three options: "Baseline Subtraction", "Drift Correction",
and "Leak Subtraction".
Drift Correction and Baseline Subtraction: Whenever you select a recording in the "Data List",
the current trace is displayed in the “Data Display” together with cursors at positions defined in
the recording script. There are three types of cursor pairs: drift cursors, baseline cursors and the
cursors for the region of interest (ROI). Please note that a drift correction or baseline subtraction
usually makes no sense for IV recordings.