3setting up hardware and software, 1 setting up roboocyte2 hardware and software – Multichannel Systems Roboocyte2 Manual User Manual
Page 15
Advertising
11
3
Setting Up Hardware and Software
3.1 Setting up Roboocyte2 Hardware and Software
Connect all cables as described below.
Warning: Carefully lay and secure the cords. Remember that someone could easily trip over
a loose cable.
Note: All electrical connections are clearly marked and the plug coding prevents confusion.
The cords should be plugged in without the use of excessive force
The following photo shows the rear panel of the Roboocyte2
Advertising