Multichannel Systems Roboocyte2 Manual - Manual (Page 20)

Roboocyte2 Manual
16
Software Control for Inserting the Tube Section (PPRT1.14( in the Valve Pump
Please switch to the "Manual Mode" in Roboocyte2 control software. Click the icon
or select main menu "Tools" "Manual Mode". Open the "Liquid Handling" tab page.
Press the button "Valve Pump" to run the pump as long as it needs to insert the tube section into
the pump housing, until the spacer stops this process. Stop the pump by clicking the button again.
Adjust the orientation of the manifold for connecting the short part of tube section to the outlet
nozzle of the manifold. Please see the picture above.