E-Mon E-D5-600800-S*SPL3-V3KIT3 - Manual (Page 14)

DIN-MON™ SMART METER
62-0442—04 14
LonWorks (optionally available on Din-Mon™ D5 meters) is a protocol used to
communicate via TP/FT-10 (Twisted Pair / Free Topology) network. It allows the end
user to read meter point data via SNVT’s (Standard Network Variable Types).
The Din-Mon™ D5 meter uses the LonWorks Protocol to provide remote monitoring of
metered data points for use in e.g. BAS (Building Automation Systems), and AMR
(Automatic Meter Reading Systems).
Fig. 8. Model D5 Advanced kWh Meter with LonWorks Input Terminals.
3.3 Terminal Covers
The Din-Mon™ meter has 2 terminal covers – one for the voltage/current terminal and
the other for the pulse/phase loss outputs and communications. Each terminal cover
has breakable teeth to let the wires feed through; break the teeth as needed for your
applications. Once wiring is completed, replace the terminal cover and secure in place.
Fig. 9. Terminal Cover.
LONWORKS
CONNECTION
M35086
SERVICE PIN