SecurityMan IPcam-SD - User manual - Manual (Page 101)

97
CHANNEL
The CHANNEL selection is defaulted to channel 1 and cannot be selected.
COMPRESSION
The IPcam-SD standard COMPRESSION format is H.264 and is non-configurable.
RESOLUTION
The IPcam-SD supports various RESOLUTIONS that you can select from the drop
down list. Supported resolutions are:
• CIF – 352X240, smaller frame size in CIF quality, intermediate video transmission.
• QCIF – 176X120, smallest frame size in CIF quality, fastest video transmission.
• VGA – 640X480, largest frame size, slow video transmission, default for main stream.
• QVGA – 320X240, smaller frame size in VGA quality, intermediate video
transmission, default for extra stream..
NOTE: Please select the desired resolution for both main stream and extra stream.
Notice extra stream only supports VGA and QVGA resolutions. Reduce to CIF or
QCIF main stream resolution to for faster video streaming.
FPS
The FPS (frames per second) relates to how many frames (pictures) the IPcam-
SD will record per second (fps). The higher the frames per second the clearer the
footage quality, the more hard drive space will take up, and reduce video streaming
transmission. The lower the frames per second the poorer the footage quality, but
takes less hard drive space, and faster video streaming.
NOTE: The FPS ranges from 1~30fps, the system default setting for main stream is
30fps and the default for extra stream is set at 15fps.
BIT RATE TYPE
The IPcam-SD supports two bit-rate types: CBR and VBR. CBR stands for Constant
Bit Rate which means the DVR will always use the bit rate (Kb/S) setup under the
Bit Rate setting below as priority to sustained the transmission speed and quality.
VBR stands for Variable Bit Rate which means that the DVR will adjust the bit
rate regardless of bit rate (Kb/S) to sustained the transmission speed and quality
selected below.
NOTE: The more the motion in the image, the more complex the image will utilize
higher bit rate to sustain the quality of the image. When selecting VBR, please
adjust the quality ranging from Lowest to highest accordingly. When selecting
CBR, please adjust the bit rate ranging from 512~2048Kb/S.
QUALITY
There are six QUALITY levels ranging from Highest to Lowest. This option will only
J. Static Configuration of – controls the level (baseline, main profile,
and high profile) of CMS configuration.
K. Copy – copies the current configuration settings.
L. Paste – pastes the configuration settings to the selected camera.
M. Refresh – restores any changes made.
N. OK – saves the changes.
O. Cancel – exits the menu without saving the changes.