SecurityMan IPcam-SD - User manual - Manual (Page 115)

111
A. CAM Name - allows you to rename the camera name.
B. Anti-jitter - allow the camera lens to have stability when it is moving.
C. Transparency - Not Applicable with IPcam-SD model.
D. Channel - fixed and default to channel 1.
E. Area Masking - allows you to mask (block) 4 areas in the live view.
F. Date/Time Stamp - enable or disable the date/time stamp in the image
or remove from the on screen display.
G. Mirror Image - click to mirror the camera left and right.
H. Flip Image - click to flip the image upside down.
I. Camera Name - lets you to adjust date/time on different positions on
the screen.
J. IR Swap - In the event if IR Cutter fails to work, check the box for more
enhanced images.
K. Anti-flicker - allows video to be displayed smoother.
CAM NAME
The CAM NAME option is used to give your camera a specific name tag that
is visible during live view and recorded files during playback. To edit the
name tag simply click on the position button located to the right of the CHN
NAME caption to bring up the chn name edit box.
NOTE: The maximum alphabets and numbers can be up to 20 characters long.
ANTI JITTER
The ANTI JITTER feature enables/disables the IPcam-SD’s anti flicker option
helps stabilize or prevent the shaking of the camera lens when the camera
pan and tilt. The system default setting is enable (checked), to disable
(unchecked) anti jitter option.
TRANSPARENCY
The TRANSPARENCY is not applicable for IPcam-SD model.
CHANNEL
The CHANNEL is defaulted to channel 1 and cannot be change.
AREA MASKING
The AREA MASKING is unchecked by default and can be check to enable the
masking or blocking of the camera image. Up to 4 masking blocks can be
used and re-position in various rectangular sizes, so to hide certain sections
of the camera image. Simple click on one of the number 1~4 button and then
click on “Position” button to block.
DATE/TIME STAMP
Check (default) the DATE/TIME STAMP option to enable the date and time to
be stamped in the image or footage. Un-check this option to disable the date
and time to be on the image or footage.