SecurityMan IPcam-SD - User manual - Manual (Page 96)

92
• • • SYSTEM
The SYSTEM menu located in the IPCam Config settings allows you to configure
the IPcam-SD’s basic system parameters (which should be configured prior to
using the camera) and consists of the following 5 sub-menus:
1. General – Time/Date configuration.
2. Encode – Video quality configuration.
3. Network – Network configuration.
4. Net Service – Network services configuration.
5. GUI Display – Camera configuration.
SHOW LOG
The SHOW LOG option is used to enable (checked) and disable (un-checked
monitoring events to be saved in the system log file.
REFRESH
The REFRESH button discards the changes you made to the current settings and
sets them back to the way they were when the configuration window was first
opened.
OK
The OK button saves your changes and exits back the previous screen.
CANCEL
The CANCEL button discards any changes made and exits back to the previous
screen.