SecurityMan IPcam-SD - User manual - Manual (Page 41)

37
• • ALARM SETTING
The “Alarm Setting” tab located in the PC Config settings consists of 4 Alarm
related tabs that will let you configure how the CMS software will record and
operate when an alarm event is triggered. These tabs are:
A. I/O Trigger – used configure alarm Input/ Output related features.
B. Video Motion – used configure Motion Detection alarm features.
C. Video Blind – used configure Video/Camera Blind alarm features.
D. Device Disconnect – used configure Device Disconnect related alarm features.
NOTE: Please remember to click the “APPLY” button located at the bottom
of each tab to save your changes and click on the “X” located at the top right
corner of the screen exit.