SecurityMan IPcam-SD - User manual - Manual (Page 45)

41
• • • VIDEO MOTION
The VIDEO MOTION tab located on the Alarm Setting tab consists of 6 settings
that are used to configure how the CMS will operate whenever Motion Detection
events occur. These settings are:
A. Device List – used to select which device you want to configure.
B. Video Motion Enable – enables the CMS to monitor video motion alerts.
C. Alam Sound – enables/disables audible alert notification.
D. Sound File Path – used to specify the location of the sound file you
want to use.
E. Full CH Display – enables/disables “Single Channel” live view for
the camera being triggered.
F. Display Time – full channel display time configuration.
NOTE: Please remember to click the “APPLY” button located at the bottom
of each tab to save your changes and click on the “X” located at the top right
corner of the screen exit.