SecurityMan IPcam-SD - User manual - Manual (Page 140)

136
Internet Explorer Remote Access
1. Obtain LAN IP address and port.
In CMS software, click “System”->”Remote Config”->”Network”, and it displays
the network ddress, default gateway, Media Port, and HTTP Port. Click “OK” to exit
back to “System”.
2. Click “NetServices”, and double-click “Mobile Monitor”. Check “Enable” box,
and the default port is 34568. Click “OK” to confirm changes and exit
“NetService”.
IMPORTANT NOTE: For static IP address subscribers (recommended), you
should have given a static IP address by your ISP (Internet Service Provider),
this is the WAN IP address you will need to access the IPCam-SD over the
Internet using the IE Browser and Smartphone Applications. For those with
dynamic IP address subscribers, use third party software that can be used to
detect the changes in dynamic IP and send out the IP changes to email address,
software such as IPWatcher, Dynamic IP Monitor, etc. or, register for a DDNS
account with www.dyndns.com, www.no-ip.com , www.dnsdynamic.org, www.
changeIP.com or any free/paid DDNS servicing website.