SecurityMan IPcam-SD - User manual - Manual (Page 108)

104
J. Cloud - used to enable/disable Serial ID service for easy remote access.
K. OK - saves the changes.
L. Cancel - exits the menu without saving the changes
IP FILTER
The
IP FILTER service allows you create a list of specific IP Address’s that
are white listed (allowed) or black listed (disallowed) from accessing the
IPcam-SD remotely. Double click on this option to bring up its corresponding
configuration window as shown below. Make sure to check Enable box, select
between black/white list, input the IP address to privilege and click Add.
Click OK to confirm the set up, highlight and click DELETE button to delete
the filter, or click CANCEL to cancel IP filtering. The system default setting is
unchecked.