SecurityMan IPcam-SD - User manual - Manual (Page 95)

91
• • • •ABNORMAL
The
ABNORMAL sub-menu located in the “Alarm” menu option consists of 6
settings that are used to enable the IPcam-SD’s memory and network monitoring
features. These settings are:
A. Event Type (drop down) – used to select which monitoring feature
you want to enable.
B. Enable – enables/disables monitoring alerts.
C. Show Log – used to adjust the motion detection sensitivity level.
D. Refresh – restores any changes made.
E. OK – saves the changes.
F. Cancel – exits the menu without saving the changes.
EVENT TYPE
The EVENT TYPE drop down is used to select which monitoring function you
wish to enable and consists of the following options:
• SD Card Not Found – sends an alert when the IPcam-SD cannot
locate the SD card.
• Insufficient Memory – sends an alert when SD card does not have
enough space for recording based on the percentile
setting under the “Less Than %” option.
• SD Card Un-Readable – sends an alert when the IPcam-SD cannot read the
SD card.
• IP Conflict – sends an alert when the IPcam-SD’s IP address comes into
conflict with another device.
ENABLE
The ENABLE option is used to enable (checked) and disable (un-checked)
monitoring features.
A
B
C
D E F