SecurityMan IPcam-SD - User manual - Manual (Page 23)

19
NOTE: Repeat Steps 2 ~ 9 to setup IPCam-SD wireless connection. Be sure
to select the Wifi IP address in step 9 to complete Wifi setup.
NOTE: please jot down the IPcam-SD’s IP address above, the HTTP
port, and the Media port.
9. In “Edit” device window, click the “IP Search” button to re-scan for
the IPcam-SD addresses as illustrated below. Then click on the new
IP address (Ethernet) to make the change and then click the “OK”
button to confirm the change and to go back to the “Add/Remove
IPCam” window. Click “OK” again to go back to main CMS window.
CMS Quick Connect (Intranet)
1. In the main CMS screen, double-click on the IP address, and then double-click
on CAM01 to connect to the IPcam-SD and the camera image should appear
on your screen.