SecurityMan IPcam-SD - User manual User Manual
Page 129
125
of any configuration options or settings. The reboot option is used simply to reboot
your IPcam-SD. To reboot the IPcam_SD, click on the reboot menu and then click
on OK to reboot.
NOTE: Rebooting is not required, however, if the IPcam-SD becomes erratic or not
responsive, please use this option to reboot the camera as shown below.
• • • •UPGRADE
The UPGRADE sub-menu located in the “Advanced” menu allows you to manually
perform firmware and software upgrades when needed. To upgrade the firmware
of the IPcam-SD, simply click on the “Upgrade” button and then browse for the
update file (.bin), open it and then click on the “Upgrade” button to start upgrading
as shown below.
NOTE: upgrades should only be performed if you are told to do so by a trained
technician at SecurityMan.