SecurityMan IPcam-SD - User manual - Manual (Page 144)

140
3. Open the IE Browser, in this demonstration we are using IE 9.0. Go into the “Tool”
and then click on the “Internet Options”. Next, click on the “Custom Level” and
browse down to “ActiveX controls and plug-ins” to “Enable” everything under the
ActiveX controls, then click “OK” to confirm settings as shown below.
4. Tap on the “Device Management” icon [IMAGE #8] and then select “Add”
located at the top right corner of the screen [IMAGE #9] to add the IPCam-SD
camera to the list.
5. The “Device List” screen [IMAGE #10] consist of the following configuration options:
• DeviceName – the device name does not need to match any specific setting and
is used solely to identify your camera from the applications Device
List screen. For example, if you are using the app to remotely monitor
2 x IPcam-SD (one at home and one at work), the device name for the
first camera could be “HOME” and the second camera could be “WORK”.