SecurityMan IPcam-SD - User manual - Manual (Page 94)

90
Notice the “Status” is automatically checked whenever “On” is selected.
• C. Off - disables the alarm output port.
• D. OK - saves the changes.
• E. Cancel – exits the menu without saving the changes.
CONFIGURATION
The CONFIGURATION check box enables the IPCam-SD to use the same
configuration settings that have been set based on the Alarm Input for the Alarm
Output terminal.
IMPORTANT NOTE: The output port is pin #3 and #4, please use an output device
that supports 5VDC only. Using other output devices that has higher power rating
or self powered output devices may not be supported.
ON
The ON check box enables the IPCam-SD alarm output device to be active or stay on
24/7. This option will not be related the the alarm input setting.
IMPORTANT NOTE: The output port is pin #3 and #4, please use an output device
that supports 5VDC only. Using other output devices that has higher power rating
or self powered output devices may not be supported.
OFF
The OFF check box disables the IPCam-SD’s alarm output terminal.
OK
The OK button saves your changes and exits back the previous screen.
CANCEL
The CANCEL button discards any changes made and exits back to the
previous screen.
A
B
C
D E